Features & Applications The SPLITMUX Dual Screen Splitter allows you to simultaneously display and monitor video signals from two different computers or video sources on a single screen. Additionally, the SPLITMUX-SVDVI-2 works as a video wall processor, video scaler, PiP generator, and audio/video switch. - Accepts digital and analog video inputs through a combination DVI/ RGBHV/ YPbPr connector and combination S-Video/Composite connector.
- Supports resolutions up to 1900x1200 and can de-interlace 1080i to 1080p.
- Dual, Picture in Picture and Full Screen display modes.
- Ability to rotate, stretch and crop multiple images.
- Ideal solution for many applications, including digital signage, trade shows, retail displays, videoconferencing and security applications.
- Connect multiple units to create a video wall as large as 32x32 screens.
- Control the unit through IR remote control, front panel interface or RS232 commands.
Specifications Video Input- Signal format: Composite, S-Video, YpbPr, RGBHV, RGsB, DVI
- Resolutions: 1080p, 1080i, 720p, 576i, 576p, 480i, 480p, VGA, SVGA, XGA, SXGA, UXGA, WVGA, WXGA, WUXGA (narrow band sync), user programmable resolutions.
- Connectors:
- One female 4-pin miniDIN S-Video connector (Can be used as composite input with supplied RCA adapter.)
- One female DVI-I connector (DVI and RGBHV/YPbPr). Analog input requires optional breakout cable.
- If a DVI-I breakout cable is used, RGBHV/YPbPr can be connected as an additional input to the DVI.
Video Output- Signal format: DVI, RGBHV, RGsB, and YpbPr.
- Resolutions: 1080p, 720p, 576p, 480p, VGA, SVGA, XGA, SXGA, UXGA, WVGA, WXGA, WUXGA (narrow band sync), user programmable resolutions.
- Connectors:
- One female DVI-I connector (DVI and RGBHV/YPbPr). Analog output requires optional breakout cable.
- If a DVI-I breakout cable is used, RGBHV/YPbPr can be connected as an additional output to the DVI.
- Bandwidth: 165MHz
Audio- Connectors: Female 8-pin miniDIN connector for use with supplied audio breakout cable.
- Audio breakout cable includes 2 sets (R&L) of RCA inputs and one set (R&L) of RCA output.
- Audio signals are compensated for propagation delay for correct sync with video.
- Input/output: Unbalanced stereo line level and 48KHz digital.
Power- 110 or 220 VAC at 50 or 60 Hz via AC adapter.
- Power consumption: 20W
DimensionsPackage Includes- SPLITMUX Dual Screen Splitter.
- Power supply.
- IR remote control.
- One audio input/output cable - one male 8-pin miniDIN connector to eight RCA jacks.
- One S-Video to Composite Video Adapter Cable - one male 4-pin miniDIN connector to three RCA jacks.
- One RS232 adapter cable - one male 6-pin miniDIN connector to one male DB9 connector.
- User manual.
Regulatory ApprovalsWarranty
(Please click the image to enlarge) Display Modes Dual Mode- In dual mode, the screen is split into two fields of equal size each displaying the entire contents of both video sources.
Full Screen Mode- In full screen mode, one of the video sources is displayed in full screen size and maximum resolution.
Picture in Picture (PIP) Mode- In PIP mode, the full screen display of one of the two video sources is accompanied by a small image (thumbnail) of the other video source allowing simultaneous monitoring.
- Translucent overlays maximize main image size while still seeing PiP
Video Wall Mode- Connect multiple units to create a video wall.
- A SPLITMUX-SVDVI-2 is required for each connected display within a video wall.
- Use SPLITMUX-LOOP-KIT to loop multiple units together for a single point of control.
- Depending on input and output resolutions, video walls up to 32x32 can be created.
Built-in Control Front Panel Interface- Use front panel buttons to locally change ports or to select a display mode.
RS232- Configuration and control can be done through the serial port.
- Female 6-pin miniDIN F (DB9 adapter included.)
- Baud rate: 2400 through 115200 bps
IR Remote Control- Configuration and control can be done using the IR remote control.
- The remote is addressable for installing with multiple units.
On Screen Display (OSD)- Select display modes and video sources with On Screen Display (OSD).
- Use the front panel buttons or IR remote control to operate the OSD.
- OSD controls for OSD position, dual mode, PIP mode, brightness, contrast, phase, Horz- and Vert-center alignment adjustment, image rotation, and sound.
|