Humanscale M7 Front End Adjustors (FEA)

Description

Adjustor or FEA is an attachment that provides up to 6" of dynamic height adjustment. It also has static settings that allow up to 5.33" of static adjustment.

Application

FEAs provide additional vertical static and/or dynamic height adjustment of the monitor. They are appropriate for a wide range of applications, including multi-user workstations and environments in which the monitor must be higher than the arm that supports it.

Guidelines

• FEAs are ordered according to the weight of the monitor with which they will be used. The monitor sizes in the description are basic guidelines only.
• It is important to note that not all 30" monitors are under 25 lbs. For 30" monitors confirming the monitor weight is a requirement of specifying an FEA.
• Both the bracket on the front of the FEA that attaches to the monitor and the bracket on the rear of the FEA that attaches to the monitor arm (ball joint) have three vertical mounting options that allow up to 5.3" of static adjustment. The monitor can be positioned as low as .6" above the center of the monitor arm (ball joint) and as high as 5.3" above the center of the arm based on which sets of holes are used to mount the FEA both to the arm and the monitor. The adjustable cylinder then allows 6" of dynamic adjustment downward from that position.
• The FEA's adjustable cylinder provides 5.5" of dynamic adjustment.
• It is important to note that the FEA provides downward dynamic adjustability up to 6". The static adjustment raises the monitor, relative to the Monitor Arm, by up to 5.2".
• Use the diagonal monitor measurement only as a guideline when specifying FEAs. Actual monitor weight should be used whenever possible to determine the most appropriate FEA for a particular monitor.

Available FEAs

* Monitor size is an estimate.  Please check your monitor weight.