DVI, USB and more - Our new Draco™ minor Fibre (Multiplex-Repeater / Cross-point switch / KVM-switch) supports the DVI graphics interface (DVI-D) and, depending on the device, USB keyboard/mouse (HID - Human Interface Device - such as touch screens, graphics tablets, barcode readers or similar may be successful – but there is no guarantee for this!) and serial (V24/RS232) transfer and also bi-directional audio transmission. Design:
-
-
max. resolution: DVI 1920x1200@60Hz (lower resolutions at least @75Hz)
-
All revisions for to remotely locate a workspace (Keyboard, Mouse and Screen)
-
USB keyboard and mouse - HID devices like Touch screen, Tableaus and other pointing or input devices possible
-
All versions have local video output to add a second screen directly at the CPU
-
Dual-Head devices available, supporting workspaces with Dual-Head grapiccards and two independend monitors
-
Max. resolution on all distances
-
Compatible with all operating systems
-
Also applicable as slave unit for Draco™ major
-
Using Rack-Mount-Kits, the devices might be mounted in server racks. Up to 4 devices may be integrated in 1U racksapce.
As a Multiplex Repeater the device allows to connect a (up to 10km remote) PC. For that purpose a local unit will directly installed at the PC. The received signals (DVI + optional serial/audio) are equalized and distributed on up to 7 equivalent outputs. These 7 outputs can be switch to up to 7 (up to 10km away) display devices. Thereto a remote unit has to be installed at each display. Optionally, two independent sources can be distributed on up to three display devices. Or four signal lines can be prepared for greater distances. Optionally, instead of a display device, multiple devices may be cascaded in two stages. The perfect solution for all real digital signage applications! As an 8-port Crosspoint Switch: each port can be switched optionally as an input or output. You can, for example, switch and distribute the signals from 3 signal sources on up to 5 displays (allowing simultaneous presentations on several displays). Alternatively, signals coming from 7 signal sources can be switched in turn to a single display. The changeover can be triggered remotely using the serial interface (RS232) and/or by a push-button at the device. As a 7-port KVM Switch: up to 7 Single-Head ports (a “Single-Head” extender system supports 1x monitor, 1x keyboard, 1x mouse) or up to 3 Dual-Head ports (a Dual-Head extender system supports 2x monitor, 1x keyboard, 1x mouse). The changeover can be triggered remotely using the serial interface (RS232) and/or by a push-button at the device. Cascade multiple devices in two stages for all applications to give up to 49/1 connections. The Draco™ minor switch has the advantage that it can be positioned up to 10km away from both your signal source and display device. This becomes possible by using the proven Draco™- Extender technology for the transmission of DVI- Monitor and USB-Keyboard and Mouse signals over Fibre- cable. The operation of a Draco™ minor Switch always requires at least one Local Unit and up to seven Remote Units from the Draco™-Extenders range.
max. resolution: DVI 1920x1200@60Hz (lower resolutions at least @75Hz)
- colour depth up to 24Bit
- Distances: ( each link, CPU-Draco or Draco-Console may have these distances)
-140m w/ Cat5, Cat5e, Cat6, (Cat7) -200m w/ 62,5µ Multimode-Fibre -400m w/ 50µ Multimode-Fibre -10.000m w/ 9µ Singlemode-Fibre
- DVI-D for the monitor
- USB Keyboard/Mouse (depending on device)
- Single-Head (1x Graphic) or Dual-Head (2x Graphic) devices available
- optional serial/audio support available
- optional 19"-rack mount kit for up to 4 devices in 1U
product notation |
part no. |
Draco™minor Switch Units |
|
Draco™minor DVI-D KVM- Switch for Multimode |
K459-7M |
Draco™minor DVI-D KVM- Switch for Singlemode |
K459-7S |
Draco™minor DVI-D KVM- Switch w/o GBICs |
K459-7X |
CATx GBIC for use in Draco™minor/major |
459-1C |
Multimode GBIC for use in Draco™minor/major |
459-1M |
Singlemode GBIC for use in Draco™minor/major |
459-1S |
|
Local Units |
Remote Units |
Media Extender Multimode |
|
|
Draco™-Media Units |
L459-0M |
R459-0M |
Draco™-Media Units, + Audio/serial |
L459-AM |
R459-AM |
|
|
|
KVM Extender Units Multimode |
|
|
Draco™-KVM Units, Single-Head |
L459-0MS |
R459-0MS |
Draco™-KVM Units, Dual-Head |
L459-0MD |
R459-0MD |
Draco™-KVM Units, Single-Head + Audio/serial |
L459-AMS |
R459-AMS |
Draco™-KVM Units, Dual-Head + Audio/serial |
L459-AMD |
R459-AMD |
|
|
|
Media Extender Singlemode |
|
|
Draco™-Media Units |
L459-0S |
R459-0S |
Draco™-Media Units, + Audio/serial |
L459-AS |
R459-AS |
|
|
|
KVM Extender Units Singlemode |
|
|
Draco™-KVM Units, Single-Head |
L459-0SS |
R459-0SS |
Draco™-KVM Units, Dual-Head |
L459-0SD |
R459-0SD |
Draco™-KVM Units, Single-Head + Audio/serial |
L459-ASS |
R459-ASS |
Draco™-KVM Units, Dual-Head + Audio/serial |
L459-ASD |
R459-ASD |
|
|
|
connecting cables / optional accessories |
part no. |
Draco™ Switching device incl. IR-RC |
K459-UE |
Cat5, S-UTP-Simplex, (4x2xAWG24) - for Single-Head |
402-0J |
plug assembly incl. 2x Cat5-plugs |
402-0A |
Cat5, S-UTP-Duplex, 2x(4x2xAWG24) - for Dual-Head |
402-1J |
plug assembly incl. 4x Cat5-plugs |
402-1A |
Multimode Break-Out-cable with 2 Fibres 2G50/125 |
433-2M |
plug assembly Multimode incl. 2x LC-plugs |
252-2L |
Singlemode Break-Out-cable with 2 Fibres 2E/125 |
433-2S |
plug assembly Singlemode incl. 2x LC-plugs |
252-2L |
international power supply unit 90V...230VAC/5VDC-2A IEC connector |
260-5E |
mounting plate to mount by screws |
455-1K |
mounting plate to mount by snap on |
455-2K |
19"-rack mount kit for 1 ... 4 Single-Head devices |
455-4G |
19"-rack mount kit for 1 ... 4 Dual-Head devices and Draco™- minor |
455-8G |
19"-mountable power supply for up to three Draco™- minor Switch/Extender Units. Use with 455-4G or 455-8G rack mount kits. |
455-PS |
Multiplex-Repeater |
Crosspoint-Switch |
KVM-Switch |
|
|
|
|