Flagship CDU with Remote Monitoring and Management, including Reboot Commands to connected servers and network equipment, and Temperature and Humidity monitoring.
|
|
|
Remote Power Control to reboot servers and other devices with dual or more (redundant) power supplies. Supported by Avocent DSView
|
|
|
|
|
IP Remote Power Management and Fail-Safe Power Redundancy for single-power corded servers. Supported by Avocent DSView
|
|
|
|
|
IPMs integrate with the PT45 or PT46 to provide access to distributed IT equipment
|
|
|
|
|
The Sentry Intelligent Power Module-2 (IPM-2) provides remote power management via IP for up to two (2) servers or other devices in a remote location. Supported by Avocent DSView
|
|
|
|
|
IP-based Remote Power Management for servers and network devices in data center equipment cabinets. Supported by Avocent DSView
|
|
|
|
|
Add a PTXM to any PTXL to increase the number of managed outlets and manage grouped outlets on different power circuits. Supported by Avocent DSView
|
|
|
|
|
-48VDC Power Distribution & Remote Power Management with 16 10-amp outlets. Supported by Avocent DSView®
|
|
|
|
|
-48VDC Power Distribution & Remote Power Management with eight 10-Amp outlets and four 70-amp outlets. Supported by Avocent DSView
|
|
|
|
|
-48 VDC Remote Power Management with four 70-amp TPC fuse-protected outlets. Supported by Avocent DSView
|
|
|
|
|
Remote Power Management and Pass-thru Console Port Access in one enclosure and - distinctively - one interface
|
|
|
|
|
Remote Power Management via the PT45 and its connected IPMs -- optional integrated Pass-Thru Console Port Access
|
|
|
|
|
Expand the management capabilities of the PTXL with the Commander PT46 and remotely manage both servers and network equipment units.
|
|
|
|
|
The PT49 connects via a serial link to a PTXL to provide remote console management as well as remote power management of each connected device
|
|
|
|
|
Four 20-Amp power circuits remotely managed via IP or secure modem
|
|
|
|
|
Control remote sites and data center equipment with IP-based remote power management. The Sentry family of Switched cabinet power distribution units (CDUs) enables remote power management to reboot servers and network gear individually or as a selected gr
|
|
|
|
|
A Switched vertical CDU with remote power control and monitoring via IP of 16 outlets. A perfect solution for mid-density remote locations. Supported by Avocent DSView
|
|
|
|
|
A Switched vertical CDU with remote power control and monitoring via IP of 24 outlets. A perfect solution for high-density remote locations. Supported by Avocent DSView
|
|
|
|
|
A Switched vertical CDU with 3 phase power, remote power control and monitoring via IP of 24 outlets. A perfect solution for high-density server racks. Supported by Avocent DSView
|
|
|
|
|
A Switched vertical CDU with high power distribution: 400V, 3 phase power; and 20A or 30A power input feed options. A perfect solution for high-density remote locations and server racks. Supported by Avocent DSView
|
|
|
|
|
A dual-power Switched CDU, with branch circuit protection and IP monitoring of 32 outlets; A perfect solution for high-density racks. Supported by Avocent DSView
|
|