LED configuration for
Model 560UF/D Dial-up and 560UF/L Leased line External Modems
|
Menu |
function 0=default |
function: 1, 2, 3, 4, 5, 6,
7, 8, 9, A |
|
|
0 Default |
Auto |
(1)MNP, (2)direct |
|
|
1 Asyn |
Asyn |
Asynchronous only, Does not support Synchronous mode. |
|
|
2 Type of line |
Dial up |
(1) 2-wired leased line |
|
|
3 Modulation |
Auto |
(1)bell 103, (2)V.21, (3)V.22/bell212, (4)V.22bis, (5)V.23, (6)V.32/V.32bis,
(7)V.34/V.34+ |
|
|
4 DTE speed |
profile 0 |
(1)115200, (2)57600, (3)38400, (4)19200, (5)14400, (6)9600, (7)4800,
(8)2400, (9)1200, (A)300 |
|
|
5 transmit level |
-10 |
(1)-2, (2)-4, (3)-6, (4)-8, (5)-9, (6)-11, (7)-12, (8)-13, (9)-14 dB |
|
|
6 Receive
sensitivity |
-43 |
(1)-33 dB |
|
|
7 Dial stored Tel No. |
normal |
(1)Dial AT&Z1, (2)Dail AT&Z2, (3)Dial AT&Z3 |
|
|
8 Smart or Dumb mode |
Smart |
(1)Dumb |
|
|
9 Compression |
enable |
(1)Disable, (2)MNP5, (3)V.42bis |
|
|
A Flow control |
RTS/CTS |
(1)Disable, (2)Xon/Xoff,
(3)Transparent Xon/Xoff,
(4)Fax |
|
|
C save to NVM |
profile 0 |
(1)Profile 1 |
|
|
(1) Config/Normal Button: down=ready to configure Menu & Function; up=Normal mode. |
|||
