QDS-WTI-Main

Remote Power Control and Remote Reboot Products
When network devices lock-up, the problem can often be corrected by cycling power off and on in order to initiate a reboot. Although this procedure is simple when the device is located in the next room, it can be troublesome and expensive if the device is located at a remote site. WTI's remote power control and reboot products provide a reliable, cost effective way to re-start "locked-up" devices at remote locations, using ASCII commands sent via modem or network.

IPS-800-CE

8-Plug, 230 VAC Internet Power Switch
The new IPS-800-CE Internet Power Switch allows you to control eight 230 VAC power outlets at the click of a mouse. Each individually controlled 230 VAC outlet can be switched On, Off or rebooted using commands issued via your web browser, telnet program, remote modem or local PC. The IPS-800-CE is designed for rack mount applications, and provides two different levels of password protected command security; the Administrator Level password allows access to all switching, reboot and configuration functions, while User Level passwords permit switching and reboot control, but do not allow the unit's configuration parameters to be changed. In order to ensure command security, passwords are transmitted via web browser using basic 64 bit encryption. The IPS-800-CE includes two separate 10 Amp power circuits, providing a total of 20 Amps maximum load.More Information

IPS-1600-CE

16-Plug, 230 VAC Internet Power Switch
The IPS-1600-CE Internet Power Switch provides a simple, effective means to control 230 VAC power in a rack mount environment at the click of a mouse. Sixteen individually controlled AC outlets can be switched On, Off or rebooted in response to commands issued via web browser, telnet, remote modem or local terminal. The IPS-1600-CE is also ideal for co-location applications, and features two separate levels of password protected security; the Administrator Level allows all switching, reboot and configuration functions, and the User Level permits only switching and reboot functions, and does not allow access to configuration menus. In order to ensure security, passwords are transmitted via web browser using basic 64 bit encryption. The IPS-1600-CE includes two separate 10 Amp power circuits, providing a total of 20 Amps maximum load.More Information

NBB-1600-CE

16-Plug, 230 VAC Network Boot Bar
For applications that require 230 VAC power control, the NBB-1600-CE Network Boot Bar allows you to control 230 VAC power on up to sixteen different devices. Like our other NBB series units, the NBB-1600-CE also features "Zero Unit" mounting, allowing you to add power control capabilities, without sacrificing valuable rack space. The NBB-1600-CE includes two separate AC power circuits; each circuit will accept a load of up to 10 amps maximum. A simple, user-friendly Web Browser Interface provides clear, effective control of switching, reboot and configuration functions, and a handy ASCII Text Interface allows command mode access for control via Telnet. The NBB-1600-CE also features two different levels of password protected security; an administrative level which is used to control switching and reboot functions and select configuration parameters, and a user level which has switching and reboot capability, but is not allowed to change configuration parameters. Passwords are transmitted using basic 64 bit encryption to ensure that command mode access remains secure.More Information

NBB-230

5-Plug, 230 VAC Network Boot Bar
WTI's new, NBB-230 Network Boot Bar allows you to remotely control power and initiate reboot cycles on 230 VAC rack mounted equipment. Like it's 115 VAC cousin the NBB-115, this 230 VAC version of the NBB also features "Zero Unit" mounting, allowing you to add remote power control capability to your equipment rack, without sacrificing valuable rack space. The NBB-230 also features a user-friendly Web Browser interface, to provide simple, yet effective control of switching, reboot and configuration functions, and a clear, easy-to-master ASCII Text Interface for applications that require command initiated control of power functions via Telnet. Two different levels of password protected security are provided: an administrative level, which allows access to switching, reboot and configuration functions, and a user level which permits switching and reboot functions, but does not permit access to configuration menus. If colocation is an important factor in your application, users can also be limited to only specific plugs based on the password entered at login. Passwords are transmitted using basic 64 bit encryption to ensure that command mode access remains secure.More Information

IPS-15-CE

230 VAC Internet Power Switch
WTI's IPS-15-CE 230 VAC Internet Power Switch allows you to use your Javascript enabled web browser to reboot remote devices and control power at far-away installation sites. With the IPS-15-CE, 230 VAC power can be switched on, off or rebooted with the click of a mouse, without leaving your office! In addition to the convenient Web interface, the Internet Power Switch can also be controlled using simple ASCII commands, making the IPS the perfect solution for applications where power switching functions are controlled by commands issued by software. Both the web browser interface and ASCII command interface are password protected to prevent unauthorized users from gaining access to power control functions. Passwords are transmitted using basic 64 bit encryption to ensure that they remain protected and that access to your equipment remains secure.More Information

TPS-2 CE

230 VAC Telnet & Dial-Up Power Switch
The TPS-2 CE Telnet Power Switch provides an ideal solution for network administrators who need a reliable, economical means for controlling 230 VAC power at remote installation sites. Like the standard TPS-2, the TPS-2 CE is also a two plug version of our popular NPS Series Network Power Switches. However, in this case, the TPS-2CE includes two independently controlled 230 VAC plugs, plus the advanced control and configuration features found in our popular NPS-230 models. In addition to allowing network and/or modem based control of the two switched plugs, the TPS-2 CE also features a convenient, manual-override switch for each plug.

NPS-230

Telnet & Dial-Up Network Power Switch
Control eight individual plugs, up to 20 amps AC, via Telnet and/or dial-up modem and local terminal with the new NPS-230 Network Power Switch. Our NPS series network power switches provide network administrators with the ability to cycle power off and on from anywhere on the LAN/WAN. If your network is down, the NPS also allows the user to simply dial-in from a standard modem for out-of-band power control.More Information

RPS-10EC

Code Controlled 230 VAC Power Control/Reboot Unit (One Plug, Expandable)
A 230 VAC version of our RPS-10 expandable, code controlled power control/reboot system. A single RPS-10 EC Master Module provides power control for one 230 VAC outlet. When reboot needs expand, additional RPS-10 EC Satellite Modules can be added to allow individual control of up to ten 230 VAC outlets. Modules are linked together using standard RJ-11 style cable, for a maximum end-to-end length of 2000 feet.More Information

Quantum Data Systems (H.K.) Ltd.