QDS-WTI-NPS-230

NetReach Model NPS-230
Telnet and Dial-Up Network Power Switch


Applications:

  • Remote 230 VAC Power Control
  • Reboot Routers, Servers, DSU/CSU
  • Turn ON/OFF Any AC Powered Device via Telnet, Modem or Local Terminal


    • Features:

  • Eight (8) Individual Outlets
  • Dual 10-Amp Circuits
  • Integrated 10-BaseT Interface
  • RS-232 Modem and Console Ports
  • Outlet-Specific Password Security
  • Network Security Features
  • Power-up Sequencing
  • Co-Location Features
  • Modem Auto-Setup Command Strings
  • Telnet or Terminal Emulation Software Controlled


    • Detailed Technical Specifications

    Power Input/Out:
    AC Input: Dual Bus Circuits; 10 Amps Each
    Voltage: 210 - 240 VAC 50 Hz
    Connectors: IEC-320 Inlets
    AC Output: Eight (8) Total, 1-4 Bus A, 5-8 Bus B
    Connectors: IEC-320-C13 Outlets
    Load: 10 Amps total for each bus
    Modem and Console Port Interface:
    Connector: DB9M DTE Configuration
    Coding: RS232 Serial ASCII, 8 bits, No Parity
    Speed: 2400, 9600, 19.2K, 38.4K bps
    Physical / Environmental:
    Items Included w/ Unit: 19" Rack Mount Hardware
    (1) DB-9 Null Cable - 6ft. (PC to NPS-230)
    (1) Ethernet Cable - 6ft.
    LED Indicators: ON, RDY, RXD, DCD, NET, Outlet ON (1-8)
    Size: 2.8" H x 17" W x 6.8" D (W=19" w/ Rack Mounts)
    Weight: 10 lbs. shipping weight
    Operating Temperature: 0oC to 45oC)
    Venting: Controller dissipates 12 watts max.
    Humidity: 10 to 90% RH, Non-Condensing

    Network equipment sometimes "locks-up" requiring a service call to a remote site just to flip the power switch to perform a simple reboot. The NPS network power Switch gives network administrators the ability to perform this function from anywhere on the LAN/WAN, or if the network is down, to simply dial-in from a standard external modem for out- of-band power control.

    Intelligent Power Control
    The NPS-230 can be controlled over any TCP/IP network using generic Telnet, or out-of-band by using an external modem and basic VT100 type terminal emulation. Each independent outlet can be switched ON, OFF or Booted (OFF- delay-ON). Each outlet can also be assigned an individual password, device name, reboot delay time and unique power-up default state.

    Security and Co-Location Feature
    The NPS unit employs address-specific IP security authorization to prevent unauthorized sources from entering the NPS command mode. Two levels of operational passwords are also available; the system administrator level, and individual user level. The user-level security features are ideal for co-location applications where multiple users may be allowed plug-specific access to the NPS unit.

    Dual Power Bus Flexibility
    The NPS-230 is equipped with two separate 10 Amp power circuits. Each bus has it's own source AC inlet, circuit breaker and 4 switched outlets. This allows for switching redundant A/B power supplies or switching devices with high current requirements.

    Designed by
    Quantum Data Systems (H.K.) Ltd.