QDS-WTI-IPS-1600-EC

NetReach Model IPS-1600-CE
16-Plug, 208-240 VAC Remote Power Management Switch

Applications:

Control Power on any 208-240 VAC Powered Device via Internet, Web Browser, Telnet, Modem or Local Terminal

Remote Power Management and Control

Reboot Servers, Routers, Web Cams, Firewalls and Other Remote Devices

Features:

Web Browser Access for Easy Setup and Operation

Encrypted Password Security

Sixteen (16) Individual Switched Outlets

Dual 10 Amp Power Circuits; Total 20 Amps Maximum Load

On / Off / Reboot Switching

IP Addressed, 10Base-T Interface

RS232 Modem / Console Port

Network Security Features

Power-Up Sequencing

Manual Power Control Button

Detailed Technical Specifications

Power Input/Out:
AC Input:	Two Separate Circuits; 10 Amps Max. per Circuit
Voltage:	208 - 240 VAC 50/60 Hz
Connectors:	Two (2) IEC-320-C14 Inlets
AC Output:	Sixteen (16) Individually Controlled AC Outlets
Connectors:	Sixteen (16) IEC-320-C13 Outlets
Current Load:	Power Circuit "A": 10 Amps Max. Power Circuit "B": 10 Amps Max.
Control Ports:
Network Port:	EThernet, 10Base-T
Console/Modem Port:	DB9M, RS232C, DTE
RS232 Coding:	Serial ASCII, 7/8 Bits, No Parity, 300 - 38.4Kps
Physical / Environmental:
Size:	Height: 3.5" (8.9cm) (Two Rack U) Depth: 7" (17.8cm) Width: 17.5" (44.5cm) (19" with Rack Mount Kit)
Shipping Weight:	12 lbs. (5.5 Kg)
Operating Temperature:	32^oF to 122^oF (0^oC to 50^oC)
Humidity:	10 to 90% RH

Servers, routers, and other electronic equipment sometimes "lock-up," often requiring a service call to a remote site just to flip the power switch to perform a simple reboot. The IPS-1600-CE Remote Power Management Switch gives you the ability to perform this function from anywhere; just point your browser to the IPS-1600-CE's IP address, enter the secure user name and password, and you're just a click away from remote power On, Off or Reboot!

Two Convenient User Interfaces
The IPS-1600-CE provides two convenient methods for accessing configuration and switching functions; The Web Browser Interface and the Command Line Interface.

The Web Browser Interface consists of a series of simple, easy-to-use web page menus that allow you to select configuration parameters or initiate switching operations using your TCP/IP network and a JavaScript enabled web browser.

The Command Line Interface is an ASCII menu system, which allows you to configure and operate the IPS-1600-CE via telnet over TCP/IP network, via modem connection or via local PC using a terminal program such as Hyperterminal or TeraTerm.

Security and Co-Location
Access to the IPS-1600-CE command mode is password protected to prevent unauthorized users from invoking sensitive switching and configuration functions. Both the Web Browser Interface and Command Line Interface require the user to enter a password before allowing access. Passwords transmitted via web browser use 64-bit encryption techniques to ensure that passwords remain protected and access to your equipment remains secure. Telnet control can be user-defined to a discrete TCP port, or completely turned off to ensure that no unprotected port is present.

The IPS-1600-CE also features two different levels of operational passwords; the System Administrator Level and the User Level. The System Level provides access to all configuration and switching functions, while the User Level is limited to switching functions only. Each outlet can have a unique User Level password, and each user can either be allowed to control all plugs, or restricted to specific plugs selected by the Administrator.

Easy to Configure, Easy to Use
The IPS-1600-CE can be configured via network, via modem, or locally via the serial console port. Easy to master, user-friendly menus and commands let you assign a location name, set system parameters and view plug status. Outlets can be switched On, Off, or booted using plug numbers or names.

Quantum Data Systems (H.K.) Ltd.