QDS-WTI-IPS-15-CE

NetReach Model IPS-15-CE
230 VAC Internet Power Switch


Applications:

  • Control Power on any AC Powered Device via Internet, Web Browser, Telnet, Modem or Local Terminal
  • Remote Power Management and Control
  • Reboot Servers, Routers, Web Cams, Firewalls and Other Remote Devices
    •

    Features:

  • Web Browser Access for Easy Setup and Operation
  • Encrypted Password Security
  • Expandable to Five (5) Individual Outlets
  • Each Outlet can Switch a 10 Amp Load
  • On / Off / Reboot Switching
  • IP Addressed, 10Base-T Interface
  • RS232 Modem / Console Port
  • Network Security Features
  • Manual Power Control Button
    •


    Detailed Technical Specifications

    Power Input/Out - Model IPS-15M-CE (Master Unit; 230 VAC):
    AC Input: 10 Amps Max.
    Voltage: 210 - 240 VAC, 50 Hz
    Connectors: IEC-320 Inlets
    AC Output: One (1) - Expandable to Five
    Connectors: IEC-320-C13 Outlets
    Current Load: 10 Amps Total
    Control / Modem Ports Interface:
    Connector: DB9M, RS232C, DTE (9-to-9-pin, null cable included)
    Coding: Serial, 9600 bps, 8 Bits, No Parity
    Physical / Environmental:
    Size: Height: 1.75" (4.5cm)
    Depth: 7" (17.8cm)
    Width: 5.80" (14.7 cm) Master Unit / 4.60" (11.7 cm) Satellite Unit
    Shipping Weight: 4 lbs. Shipping Weight
    Temperature: (Operating) 32oF to 122oF (0oC to 50oC)
    Humidity: 10 to 90% RH
    Agency Approvals: CE Approval

    Ordering Inforamtion:
    IPS-15M-CE Master Control Unit, 230 VAC @ 10 Amps
    IPS-15S-CE Satellite Unit, 230 VAC @ 10 Amps
    IPS-15R 19" Rack Mount Tray, 1RU (Mounts Master Unit and Two Satellite Units)
    IPS-15ZU Mounting Bracket for Zero unit Mounting

    Servers, routers, and other electronic equipment sometimes "locks-up," often requiring a service call to a remote site just to flip the power switch to perform a simple reboot. The IPS-15-CE Internet Power Switch gives you the ability to perform this function from anywhere, just point your browser to the IPS-15-CE's IP address, enter the secure user name and password, and you're just a click away from remote power On, Off or Reboot!

    Two Convenient User Interfaces
    The IPS-15-CE provides two convenient methods for accessing configuration and switching functions; The Web Browser Interface and the Command Line Interface.

    The Web Browser Interface consists of a series of simple, easy-to-use web page menus that allow you to select configuration parameters or initiate switching operations using your TCP/IP network and a JavaScript enabled web browser.

    The Command Line Interface is an ASCII menu system, which allows you to configure and operate the IPS-15-CE via telnet over TCP/IP network, via modem connection or via local PC using a terminal program such as Hyperterminal or TeraTerm.

    Expandable, Flexible Design
    The IPS-15M-CE Master Unit can be linked to four optional, low cost satellite units for a total of five individually controlled outlets. This allows the IPS-15-CE to easilly grow to fit the requirements of your power control application.

    Flexible mounting options are also available. A Zero U rack bracket lets you mount the IPS on the outside of a standard 19 inch rack rail. A 1U rack tray allows mounting one main unit and two satellite units in a 19 inch rack.

    Security Features
    Access to the IPS-15-CE command mode is password protected to prevent unauthorized users from gaining access to sensitive switching and configuration functions. Both the Web Browser Interface and Command Line Interface require the user to enter a password before allowing access. Passwords transmitted via web browser use 64-bit encryption techniques to ensure that passwords remain protected and access to your equipment remains secure. Telnet control can be user-defined to a discrete TCP port, or completely turned off to ensure that no unprotected port is present.

    The IPS-15-CE also features two different levels of operational passwords; the System Administrator Level and the User Level. The System Level provides access to all configuration and switching functions, while the User Level is limited to switching functions only.

    Easy to Configure, Easy to Use
    The IPS can be configured via network, via modem, or locally via the serial console port. Easy to master, user-friendly menus and commands let you assign a location name, set system parameters and view plug status. Outlets can be switched On, Off, or booted using plug numbers or names.


    Designed by
    Quantum Data Systems (H.K.) Ltd.