|
DVI-Equalizer

The DVI Equalizer allows to install a monitor up to 40m (35m +
5m) away from the graphic source. The signals, which are deformed by the cable,
will be equalized, so that a optimum display on all DVI monitors is possible.
The distance is divided in a maximum of 35m between graphic source and Equalizer
and a maximum of 5m between Equalizer and monitor. Using distances with more
than 20m we recommend the use of cables with exceptional low
absorbability.
The Singlelink
Equalizer normally needs no external power supply unit (power is supplied by the
monitor via the DVI-Interface). If the power which is supplied by the monitor is
not sufficient a separate power unit is available.
Attention A daisy chain
of several Equalizers is NOT possible.
Singlelink: in the
Singlelink version resolutions up to 1920x1200 are supplied. At resolutions
lower than 1600x1200 (<165MHz Pixelclock) it is possible to bridge also
greater distances.
Duallink: in the
Duallink version resolutions up to 2560x2048 are supplied. At resolutions lower
than 2560x2048 (<165MHz Pixelclock) it is possible to bridge also greater
distances.
Technical
Data
-
max.
resolution:
Singlelink: DVI 1920x1200@60Hz, 1600x1200@60Hz (lower
resolutions operate up to 75 Hz vertical refresh)
Duallink: DVI
2560x1200@60Hz
-
colour depth 24 Bit
-
Distances:
35m between graphik
source and Equalizer
5m between Equalizer and Monitor
-
DVI-D for the monitor
transmission
-
DDC information transparent,
i.e. HDCP compatible
-
Power supply for the
Duallink Equalizer is included in delivery, for Singlelink Equalizer available
as an option
|
Design
- Singlelink: DVI
1920x1200@60Hz, 1600x1200@60Hz (lower resolutions operate up to 75 Hz vertical
refresh)
Duallink: DVI 2560x1200@60Hz
-
Singlelink Equalizer without
power supply unit, Duallink Equalizer with power supply unit
-
HDCP compatible by
transparent DDC transmission (deselectable)
|
|